darbeli kırıcı

Temporary quarries installed in project works such as dam, road construction may need to be moved to a different site at the end of the project. This led to the need to develop mobile plant concepts. Since mobile groups can be transported more easily than fixed facilities, they significantly reduce the cost of transportation. Also, thanks to its ease of transportation, it provides a serious advantage in start-up in a short time.From this point of view, we have developed the MKE series closed circuit mobile unit consisting of UMG06 rock feeder and bunker, CDK1312 Primary Impact Crusher, 3-Deck UME2050 Vibrating Screen and belt conveyors.

Aşınmaya karşı uzun ömürlüdür. Güçlü ve dayanımlı gövde yapısıyla az bakımla uzun süre çalışma imkanı verir. Kolay ayarlanabilir hidrolik yapısıyla işçilik süresini kısaltır.

UĞURMAK UTK Series Tertiary Impact Crushers are preferred at crushing for medium and low hardness, mostly at tertiary level and can be used as secondary crushers depending on the hardness and feeding size. It produces very fine aggregate which is required for asphalt and concrete production. The rotor can rotate in both directions. The direction of rotation is bi-directional, allowing product to be received in two different gradations without setting changes. In addition, it provides longer life since there will be bi-directional wear on rotor hammers. According to the design of the facility, they can be manufactured as mobile, with fixed steel legs, with fixed concrete legs, with fixed skid chassis.

Stock conveyors can be produced as radial type according to the location of the facility, land conditions and customer demand. The Belt Conveyor chassis is connected to the ground from the tail module with a fixed joint. High-strength steel construction feet made to support the weight of the intermediate modules and the drive module are attached to the axle located on the wheels. These wheels are preferred as filled wheels in order to be loose-proof. The gearbox is driven by a coupled motor. It is equipped with a special brake system to prevent movement due to environmental effects during operation or stopping. The center of rotation is the fixed hinge point in the tail module. It is provided to turn clockwise and counterclockwise by the angle allowed. In this way, the stock amount is much more than a fixed stock belt conveyor.