TERMOFAN HAVALANDIRMA

Termofan TKS model standard air handling units are composed of 26 different sizes ranging from 1.500 m³/h and 120.000 m³/h in air flow rates. The smallest model is TKS 7-7 outer cross-section dimensions of 710 mm x710 mm wheares the largest model is TKS 22-22 with outer dimensions of 2.235 mm x 2.235 mm. Higher air flow units can be designed with special dimensions. By joining the air intake and/or air mixing sections, filter sections, air heater and air cooler sections, humidifiers and ventilators it is possible to create tailor-made units serving different design purposes. It is also possible to make double deck executions with or without heat recovery units.

The THKS model air handling units are designed in parallel to today’s rapidly advancing HVAC technology to meet the IAQ requirements and air-borne particule controlled enviroments such as surgical operation rooms, intensive care rooms, electron- ic and optical industries as classified and with VDI 2803/1 Class-0 to Class-7. The THKS air handling units are designed and produced in conformity with DIN 1946-4 and with EN 13053. The inner surfaces of the units are completely flat and they don’t have protruding pieces or particles that may cause dust accumulation. The inner parts are washable and they have a completely hygienic construction. The THKS model units are produced in 26 basic sizes with air flow rates ranging from 1.520 m3/h – 39.200 m3/h. Larger units based on special designs are also possible upon request.

THNS package type units are special ventilation units designed to remove excess humidity caused by surface evaporation indoor swimming pools and ensure optimal comfort in the pool area all year round. When the relative humidity rises above 60%, it does not only affect the comfort conditions, but also causes condensation on the walls and windows, and damages all installation elements in the room. THNS series units are packaged type air conditioners designed to provide the highest comfort conditions inside the swimming pool and, if necessary, to remove high absolute humidity. Since the THNS type air conditioners are equipped with a refrigerant circuit, electrical control panel and programmable automatic control equipment, nothing is required to operate them other than the necessary electrical wiring to the installation location.

THRV series heat recovery units body structure was designed with taking into consideration of future standarts. Especially, criteria of efficiency was created above of nowadays standarts. Energy consumptions were reduced with minimizing of energy losses in the days of increasing of importance of energy consumptions. Shape of designing of fan montage that consist of THRV series heat recovery unşits was avoided turbulance flow in the units. THRV series heat recovery units are in compact structure at the same time with low air flow velocities. In this way, units catch low pressure drops and at the same time units will be at high efficiency. While heat recovery units running, if there will occur any condensation, THRV series has drain outlet standardly.